This pocket attaches to the back of the PFD with our unique Form-Flow® attachment system. All edges are protected to eliminate snagging on branches, rebar and other debris. The sides are expandable mesh to expedite water drainage and increase volume. Internal lanyard attachment point ensures what you need is where you need it, when you need it.
Dimension: 10.5” x 7” x 1.5”
20RES-40

These pockets are form fitted using stretch mesh to drain water and accommodate increased capacity while maintain a low profile. The double zipper slider allows partial opening for antennas and lanyards. Padding protects contents and fabric against blunt trauma, while providing inherent flotation. These pockets can be added or remove in field operations as required. Great for communication gear, GPS units, etc.
Dimension: 4.5” x 6.5” x 1”
20RES-40c

These large pockets are form fitted using stretch mesh to drain water and accommodate increased capacity while maintaining a low profile.  The double zipper sliders allow partial opening so tethers can be used for quick access pocketed items.  Padding protects contents and fabric against hard surfaces, while providing inherent flotation.  These pockets can be added or removed in field operations as required.  Great for small first aid kit, Pocket Mask, Sam Splints, Flip Lines etc.
Not available for Standard Issue PFD.
Dimension: 7” x 7” x 1” Expandable to 1.5”.
20RES-40b

Positioned on the PFD to ensure safe in-water body orientation when attached to an external line. In conjunction with the Extrication Line, the 2” nylon webbing Quick Release Belt with parrel bead enables a strong swimmer or tagged rescuer to safely release themselves or the swimmer, if required. The standard PFD comes with belt attached.
15TL-05b

Upgraded with a NEW chest attachment system. This tubular webbing contact system attaches to the Quick Release Belt at the back of your PFD by a stainless steel d-ring and adjustable ladder lock. The activation point mounts on the chest area to enable an entrapped person to assist a rescuer in their own extrication. This safe low profile design will release automatically from any direction under specific load conditions.  It can be reached with either hand and remains accessible during a lower body pin. The keyhole carabiner will not snag while engaging or disengaging, thereby reducing risk and time during the rescue.
15TL-05d

Certified Solas™ marine grade highly reflective customizable team identification badges. Mounted front and back and secured with Velcro for easy removal during undercover &/or night operations. If you work for different emergency teams simply change badges call to call. SAR, Fire, Police etc.
Custom lettering available. Set of 2 - Front: 2” x 2”, Back: 3” x 9”.
20RES-41

Flexibility to add or reduce your visual presence. Eight highly reflective strips attach to key contact points for non-permanent adhesion.
20RES-41a

Proper fit being of primary importance, the Chest Expander allows the PFD to fit in the event of additional thermal/ballistic protection and user weight gain. This allows long term near-unlimited fit range for any user regardless of build. We can build these parallel or tapered to fit broadened chests or abdomens as required.
20RES-43

Colour coded for visual reference, these quick release straps allow the attachment of a zippered Gear Pouch (wrap-kit) and Throw Bag to mount the PFD without the need of a waist belt. Flexible to accommodate any combination of 1 or 2 throw bags per side or gear pouch on each side. Removable when not in use.
20RES-42

Built for pulleys, prussics, anchors, or other gear your calls may require. The zippered Emergency Deployment System Gear Pouch is contoured for a low profile and uses 3 belt loops to ensure a snug fit against your body. The pouch attaches near the users waist at the base of the PFD with a Quick-Draw Deployment Strap for instant access.
05RB-45

Our Standard Wedge Throw Bag is built with three belt loops to attach it to the base of the PFD and provide instant access by utilizing the colour coded Quick Draw Deployment Strap.  The system is built to accommodate 1 or 2 throw bags per side or 1 gear pouch per side on the users left or right.
Quick Draw Wedge Throw Bag Small 70' x 1/4'' Poly   10TB-30a
Quick Draw Wedge Throw Bag Small 60' x 1/4'' Spec  10TB-30aa

See page: http://www.northwater.com/html/products/river_rescue/wedge.html

This holster is designed to attach vertically or horizontally to your NW PFD, using the existing straps. It can also be attached to any standard belt.
20RES-45

An all black version to reduced visibility for enforcement teams where stealth is required during undercover & / or night operations.  When visibility is an asset simply add a set of Reflective Strips and your Team Identification Panels.
20RES-43

*NON APPROVED DEVICE

All NW PFD’s displaying the ULC logo meet or exceed Canadian Coast Guard Certification. Any modification to the original PFD may put the user in contravention of these regulations. This would include, but is not limited to, altering the PFD from its original design, adding or removing buoyancy, adjusting buoyancy ratios, attaching non approved devices. It is up to the individual user to maintain and use the PFD in a responsible and safe manner in accordance with the regulations governing their jurisdiction.